| Whitepapers |
| • |
Electrostatic Discharge (ESD) Tutorial
This document explains how ESD has been a serious industrial problem for centuries and offers best practices for minimizing and/or eliminating ESD. |
| • |
Guidelines for the Disposal of Lithium Batteries
The disposal of lithium batteries is of the utmost importance to Axonn, both from a safety aspect and an environmental standpoint. This document will outline some instructions for the safe disposal of these batteries; also regulating issues will be presented. |
| • |
RF Path Loss & Transmission Distance Calculations
This paper presents mathematical transmission models that represent realistic transmission systems to answer these questions; 1. How far apart can the transmitter and receiver be in distance while maintaining acceptable performance?, and 2. What can be changed to increase this separation distance? |
| • |
Wind Force on AXTracker MMT Enclosure
This document derives the wind pressure exerted on the MMT when an asset is moving and offers information that is needed to design adequate mounting arrangements. |
| • |
GPS L1 Link Budget
A wireless system link budget accounts for signal power, noise power and interference power at relevant points in the system. The link budget is generally used to ensure that the demodulator has adequate SNR and SIR for all required system operating conditions. |
| • |
Working Explanation of Three-Antenna Gain Measuring Technique
This paper presents a working level description of the well-established three-antenna method for determining antenna gain. The theory and an example are presented. |
| • |
Distortion Measurement Test Procedure
This document covers the procedure for measurement of the distortion characteristics of an electronic component. The document is written in a general manner to cover testing various active components that may need to be characterized. In particular, the measurement and calculation of 1 dB compression point, second order intercept point, and third order intercept point are covered. |
| • |
Packet Error Rate to Bit Error Rate Relationship
This document explains some of the mathematics behind relating a measured packet error rate (PER) value to an immeasurable bit error rate (BER). Three different methods of computing BER from PER will be examined and compared. |
| • |
How to Transition your Products and Supply Chain for RoHS Compliance
This report will serve as an overview of the pertinent information from the conference titled “How to Transition your Products and Supply Chain for RoHS Compliance”. |
